Description
The Chelsea 489 Series Power Take-Off, part number 489XAITX-A3RF or 489XAITXA3RF, mounts directly to an 8-bolt transmission opening on most manual transmissions including Eaton Fuller, Volvo/Mack, and Tremec units. The one-piece cast iron housing eliminates the adapter plate found on some PTO installations, reducing potential leak paths. This unit uses wire/cable mechanical shift and delivers up to 46-55 HP of output power, with shaft power ratings of 24 HP at 500 RPM and 48 HP at 1,000 RPM. The 489 Series carries the same 250 lb-ft intermittent torque capacity as the 442 Series and features tapered bearings instead of needle bearings for greater load-bearing capability. Output shaft is 1-1/4″ round. Call us to confirm proper fit for your application.
Features
8-bolt one-piece cast iron housing mounts directly to transmission opening, no adapter plate needed
Wire/cable mechanical shift with electric-over-air shift option available in the 489 Series
Intermittent torque capacity matches the 442 Series at 250 lb-ft (339 Nm)
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
1-1/4″ round output shaft; greaseable output options to reduce spline fretting and corrosion
Kit-style design with internal parts common to the 442 Series simplifies servicing
Tech Specs
- PRODUCT SERIES: 489
- MOUNTING TYPE: 8-Bolt
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT SHAFT TYPE: 1-1/4″ Round / 1-1/4″ Round with Key
- OUTPUT POWER: 46-55 HP (31-40 kW)
- SHAFT POWER: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- INTERMITTENT TORQUE: 250 lb-ft / 339 Nm (check application pages for actual torque ratings)
- CONTINUOUS TORQUE: De-rate torque rating 30% (check application pages for actual torque ratings)
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO aperture
- LUBRICANT: X = No Pressure Lube, P = Pressure Lube
