Description
Technical Specifications
21256 1989-1987 Mitsubishi Fuso, FE, Mitsubishi Fuso 4-Cyl. 3.3 L Diesel, Upper 14.9 378 No 1.75 44 2 51
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation – the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse.This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates – Driven By Possibility
No 0 Coolant Hose Molded Coolant Hose Hose
Vehicle Fitment
| Make | Model | Years |
|---|---|---|
| FORD | LN7000 | 1981-1987 |
| MITSUBISHI FUSO | FE | 1987-1989 |
| MITSUBISHI FUSO | FH | 1988-1991 |
| MITSUBISHI FUSO | FK | 1986-1991 |
| MITSUBISHI FUSO | FM | 1986-1991 |
| STUDEBAKER | E12 | 1955-1956 |
| STUDEBAKER | E7 | 1955-1956 |
| STUDEBAKER | 3E12 | 1958 |
| STUDEBAKER | 3E12D | 1958 |
| STUDEBAKER | 3E7 | 1958 |
| STUDEBAKER | 3E7D | 1958 |
| STUDEBAKER | 4E12 | 1959 |
| STUDEBAKER | 4E12D | 1959 |
| STUDEBAKER | 4E2 | 1959 |
| STUDEBAKER | 4E2D | 1959 |
This list of compatible vehicles and years is accurate, but it may not be complete. There may be additional vehicle applications and years compatible with this part not listed.
