Description
The Dana Spicer SPL140 series driveshaft, part number 140DS55001-500M or 140DS55001500M, is a welded steel drive shaft assembly built to heavy-duty driveline specifications. The steel tube measures 4.33 inches in diameter with a .197-inch wall, and the tube length is 19.685 inches (500.0 mm). Collapsed centerline-to-centerline length is 34.055 inches (865.0 mm); installed centerline-to-centerline is 36.221 inches (920.0 mm). Maximum slip is 4.3307 inches and mid-slip is 2.165 inches. The assembly includes two universal joints, operates unphased, and is rated for a 25-degree joint angle. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Dana Spicer SPL140 series driveshaft assembly
Welded steel tube: 4.33 in. diameter x .197 in. wall (110.0 x 5.00 mm)
Tube length: 19.685 in. (500.0 mm)
Installed C/L-to-C/L: 36.221 in. (920.0 mm); collapsed: 34.055 in. (865.0 mm)
Includes 2 universal joints; 25-degree joint angle rating
Unphased assembly (0 degrees phase)
Tech Specs
- SeriesSPL140
- Shaft MaterialSteel
- Tube Size4.33 x .197 in. (110.0 x 5.00 mm)
- Tube Length19.685 in. (500.0 mm)
- Max Slip4.3307 in. (110.0 mm)
- Mid Slip2.1654 in. (55.0 mm)
- C/L Yoke to C/L Yoke – Collapsed34.055 in. (865.0 mm)
- C/L Yoke to C/L Yoke – Installed36.221 in. (920.0 mm)
- Joint Angle25 degrees
- PhasedNo (0 degrees)
- Assembly TypeWelded
- Universal Joints IncludedYes – 2
- VMRS Code024000000
