Description
Dana Spicer part number 170DS55003C-1499MR or 170DS55003C1499MR is a welded SPL170 series steel driveshaft assembly. The tube measures 5.06 inches in diameter with a .167-inch wall (128.5 x 4.25 mm), and the tube length is 58.78 inches (1,499.0 mm). Collapsed center-line-to-center-line yoke distance is 73.62 inches (1,870.0 mm); installed center-line-to-center-line is 75.79 inches (1,925.0 mm). Maximum slip travel is 4.33 inches (110.0 mm); mid-slip is 2.17 inches (55.0 mm). The assembly includes two SPL-style universal joints and is rated for up to a 25-degree joint angle. Not phased. A genuine Dana Spicer part sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
SPL170 series welded steel driveshaft assembly
Tube diameter 5.06 in. x .167 in. wall (128.5 x 4.25 mm)
Tube length 58.78 in. (1,499.0 mm)
Collapsed CL-to-CL yoke distance 73.62 in. (1,870.0 mm); installed 75.79 in. (1,925.0 mm)
Maximum slip 4.33 in. (110.0 mm); mid-slip 2.17 in. (55.0 mm)
2 SPL-style universal joints included; 25-degree joint angle rating; non-phased
Tech Specs
- SeriesSPL170
- Shaft MaterialSteel
- Tube Size5.06 x .167 in. (128.5 x 4.25 mm)
- Tube Length58.78 in. (1,499.0 mm)
- Max Slip4.33 in. (110.0 mm)
- Mid Slip2.17 in. (55.0 mm)
- CL Yoke To CL Yoke – Collapsed73.62 in. (1,870.0 mm)
- CL Yoke To CL Yoke – Installed75.79 in. (1,925.0 mm)
- AssemblyWelded
- Universal Joints IncludedYes – 2 SPL-style
- Joint Angle25 degrees
- PhasedNo
